ok H&R spring is in - Nissan Murano

truckintube · 07-27-2010, 03:42 PM

since BWR couldn't deliver the coil spring, I went with H&R

will take better pic this weekend since I'm going to the show at upstate New York.

BigNate · 08-05-2010, 04:38 PM

Looks great.

I am thinking about buying these but I have a few questions. Did you have to buy new shocks and/or struts when you put these on? Also did you need to get an alignment after installing these? I have never done anything like this so I just want to know what to expect. Thanks.

truckintube · 08-05-2010, 07:33 PM

Quote:

Originally Posted by BigNate

Looks great.

I am thinking about buying these but I have a few questions. Did you have to buy new shocks and/or struts when you put these on? Also did you need to get an alignment after installing these? I have never done anything like this so I just want to know what to expect. Thanks.

I didn't change the struts or shock in rear, it works fine, you do need alignment after this.

your ride will change. will be more bounce on the bumps. I'm used to it so it doesn't affect me but corners I can turn easier and harder now.

sawasan · 05-19-2011, 09:15 PM

Quote:

Originally Posted by truckintube

since BWR couldn't deliver the coil spring, I went with H&R

will take better pic this weekend since I'm going to the show at upstate New York.

Hey truckintube,

Looks good. Do you know how many inches it actually lowered the Mo?? Thanks.

truckintube · 05-19-2011, 09:17 PM

tire diameter is maybe 1/4 inch smaller than factory.
so I say did drop about 1.5inch at least I don't have exact measurements though.

sawasan · 05-19-2011, 10:08 PM

Quote:

Originally Posted by truckintube

tire diameter is maybe 1/4 inch smaller than factory.
so I say did drop about 1.5inch at least I don't have exact measurements though.

Thanks. I've wanted to install them also. You didn't have any camber problems with a alignment did you?

truckintube · 05-19-2011, 10:32 PM

will have bit of negative camber on rear you do need to get alignment done after.

truckintube · 06-19-2011, 04:32 PM

Ok so I washed the Mo today.... so you can have better look....

sawasan · 06-20-2011, 03:47 AM

Looks good.

gatubel · 07-04-2011, 05:21 PM

looks bad ass. are those 20s? I have an 03 murano with 20s on and was thinking of lowering it as well.
does it affect the performance? please let me know thanks

truckintube · 07-05-2011, 06:45 AM

for me I feel handling is better bit lower in center of gravity helps....

07-27-2010, 03:42 PM	#1 (permalink)
truckintube Registered User Join Date: Jan 2010 Location: NY Posts: 115	ok H&R spring is in since BWR couldn't deliver the coil spring, I went with H&R will take better pic this weekend since I'm going to the show at upstate New York. __________________ Owner of TruckinTube.com and vCigStore.com Exceeding Limits Truck Club NY Chap V.P.

08-05-2010, 04:38 PM	#2 (permalink)
BigNate Registered User Join Date: Aug 2004 Location: Klamath Falls, Oregon Posts: 20	Looks great. I am thinking about buying these but I have a few questions. Did you have to buy new shocks and/or struts when you put these on? Also did you need to get an alignment after installing these? I have never done anything like this so I just want to know what to expect. Thanks. __________________ 2004 SL AWD Sunlit Copper/Cabernet Leather Just about everything but Nav Current Mods: 22" Diamo Wheels E & G Classics "Z" Grille Cloudrider Lower Grille Insert JWT Pop Charger Tinted Front Windows LED Parking Lamps Future Mods: H & R Lowering Springs Flowmaster 80 Series Muffler Z Tube Navigation/DVD Receiver

05-19-2011, 09:17 PM	#5 (permalink)
truckintube Registered User Join Date: Jan 2010 Location: NY Posts: 115	tire diameter is maybe 1/4 inch smaller than factory. so I say did drop about 1.5inch at least I don't have exact measurements though. __________________ Owner of TruckinTube.com and vCigStore.com Exceeding Limits Truck Club NY Chap V.P.

05-19-2011, 10:32 PM	#7 (permalink)
truckintube Registered User Join Date: Jan 2010 Location: NY Posts: 115	will have bit of negative camber on rear you do need to get alignment done after. __________________ Owner of TruckinTube.com and vCigStore.com Exceeding Limits Truck Club NY Chap V.P.

06-19-2011, 04:32 PM	#8 (permalink)
truckintube Registered User Join Date: Jan 2010 Location: NY Posts: 115	Ok so I washed the Mo today.... so you can have better look.... __________________ Owner of TruckinTube.com and vCigStore.com Exceeding Limits Truck Club NY Chap V.P.

06-20-2011, 03:47 AM	#9 (permalink)
sawasan Registered User Join Date: Oct 2007 Location: Palm Desert, CA Posts: 332	Looks good. __________________ '07 GLacier Pearl Murano SL AWD w/Gibson exhaust, JWT Popcharger intake, AVS clear hood deflector, full tint, '07 18"x8 & 8.5" 350Z wheels, nerf bars, woodlook dash kit, Sport Tech high performance drilled brake kit '07 Redline Touring 350Z 6 spd w/ Nismo exhaust & dual intake, Stillen Type 1 wing & rear diffuser, Veilside side wings, CF lip cover, 19" TSW Cadwell's w/Michelin Pilot Super Sport's, tint, carbon fiber dash kit R.I.P. '03 Touring 6 spd 350Z w/mods

07-04-2011, 05:21 PM	#10 (permalink)
gatubel Registered User Join Date: Apr 2011 Location: Kansas City Posts: 103	looks bad ass. are those 20s? I have an 03 murano with 20s on and was thinking of lowering it as well. does it affect the performance? please let me know thanks

07-05-2011, 06:45 AM	#11 (permalink)
truckintube Registered User Join Date: Jan 2010 Location: NY Posts: 115	for me I feel handling is better bit lower in center of gravity helps.... __________________ Owner of TruckinTube.com and vCigStore.com Exceeding Limits Truck Club NY Chap V.P.

Remove Advertisements Sponsored Links
Nissan Murano Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread: