Oem backup camera & camera control unit. - Page 4 - Nissan Murano

S-N-I-P-E-R · 02-24-2011, 03:44 AM

Quote:

Originally Posted by wastinu

Hey SNIPER, do you have a picture of where you installed the CCU? I know it goes behind the 'luggage side finisher lower' on the passenger side, but I can't see any screw holes to mount it. Thanks!!

Hey Wastinu, So sorry for delay! I've attached some pics for you.

wastinu · 02-24-2011, 04:29 PM

SNIPER - That is perfect, thanks very much!!! I was having trouble figuring out where the metal tab with a hole in it that comes off the CCU attaches, but thanks to your pics, I see it serves no purpose at all!!! Thanks again, very help and informative!!!

wastinu · 05-03-2011, 06:56 PM

I just started work on this project again and am having trouble with one piece. For those that have done the install in a pre-wired MO, can you tell me where the purple/white wire from the ccu ends? I know it is to link up with the dcu to display the camera shot, but I don't know where the wire dead ends for pick up when you are pre-wired? Thanks!!

james0076ss · 07-20-2011, 12:32 PM

How do you know if your MO is prewired? If prewired is there any need to remove any additional audio and video components, headunit, center console, etc?

wastinu · 07-20-2011, 09:55 PM

Hey James, if you look in the back behind the trim and carpeting on the passenger side where the ccu should be located, you should find a harness that is not in use if you are prewired. There will also be a harness in the hatch beneath the trim cover for the camera to plug into. I can't say for an 07, but my 05 was far from plug and play. Since you have the color screen, it may be plug and play for you though, in which case you would only need to purchase the ccu and camera and you are good to go.

james0076ss · 07-26-2011, 12:49 PM

Thanks wastinu. Looks Like I'm pre-wired. Went to the dealership to see how much the CCU and camera cost and they wanted a whooping $879 for both. Still deciding on this mod. Hopefully ebay will have this one day (fingers crossed).

wastinu · 07-26-2011, 01:32 PM

Hey James, ya dealership is WAY too expensive!! I got my parts from an auto recycler, but eBay is a great option as well. I think I paid $250 for both the ccu and camera. Our gen of Mo have been around long enough that you should be able to get used parts with some looking. Good luck with search!!!

hydrothunder · 02-07-2012, 09:50 PM

I know this is an old post but I have been working on getting parts for this for a while now and am ready to work on this. My qestion is where exactly is the CCU wiring located. I have been able to put in the camera and the wiring for that was there now I am looking for the CCU wiring and am not exactly sure where that should be located (if it is there).
Thanks for any and all help.

350z006 · 02-09-2012, 11:48 PM

See pics in post 46

Quote:

Originally Posted by hydrothunder

I know this is an old post but I have been working on getting parts for this for a while now and am ready to work on this. My qestion is where exactly is the CCU wiring located. I have been able to put in the camera and the wiring for that was there now I am looking for the CCU wiring and am not exactly sure where that should be located (if it is there).
Thanks for any and all help.

hydrothunder · 02-10-2012, 06:04 PM

I see those but can't tell where that is.

wastinu · 02-13-2012, 01:54 PM

hydrothunder - see attached pic. It is right behind the carpeting I have highlighted with the arrow. Hope that helps.

james0076ss · 03-11-2012, 04:31 PM

Anybody know if other backup camera modules or actual backup camera is compatible, like the Nissa Altima would work on a 2007 Murano. From the look of it, it has the same connectors

S-N-I-P-E-R · 03-11-2012, 04:34 PM

Hey James,
I'm not really sure mate!!!

danf · 03-11-2012, 05:39 PM

I have the backup module out of an Armada and a camera out of a Q45. part numbers are SLIGHTLY off but I believe they may have supersessions on certain parts.

Towards sniper- you wouldnt happen to know of any place i could get the plug from for the control module do you?

james0076ss · 03-11-2012, 06:31 PM

Quote:

Originally Posted by danf

I have the backup module out of an Armada and a camera out of a Q45. part numbers are SLIGHTLY off but I believe they may have supersessions on certain parts.

Towards sniper- you wouldnt happen to know of any place i could get the plug from for the control module do you?

Thats good to know. I'll give it a shot. Thanks

02-24-2011, 04:29 PM	#47 (permalink)
wastinu Registered User Join Date: Oct 2009 Location: Grande Prairie, AB Posts: 60	SNIPER - That is perfect, thanks very much!!! I was having trouble figuring out where the metal tab with a hole in it that comes off the CCU attaches, but thanks to your pics, I see it serves no purpose at all!!! Thanks again, very help and informative!!! __________________ 2005 SE LED taillight conv Added OEM NAV Added 07 Gauge Cluster Added OEM Backup Cam

05-03-2011, 06:56 PM	#48 (permalink)
wastinu Registered User Join Date: Oct 2009 Location: Grande Prairie, AB Posts: 60	I just started work on this project again and am having trouble with one piece. For those that have done the install in a pre-wired MO, can you tell me where the purple/white wire from the ccu ends? I know it is to link up with the dcu to display the camera shot, but I don't know where the wire dead ends for pick up when you are pre-wired? Thanks!! __________________ 2005 SE LED taillight conv Added OEM NAV Added 07 Gauge Cluster Added OEM Backup Cam

07-20-2011, 12:32 PM	#49 (permalink)
james0076ss Registered User Join Date: Apr 2008 Posts: 26	How do you know if your MO is prewired? If prewired is there any need to remove any additional audio and video components, headunit, center console, etc? __________________ 07" Murano IP S AWD w/ Leather 07" G35S OB 6MT w/ Nav, Prem, Tech, 4was

07-20-2011, 09:55 PM	#50 (permalink)
wastinu Registered User Join Date: Oct 2009 Location: Grande Prairie, AB Posts: 60	Hey James, if you look in the back behind the trim and carpeting on the passenger side where the ccu should be located, you should find a harness that is not in use if you are prewired. There will also be a harness in the hatch beneath the trim cover for the camera to plug into. I can't say for an 07, but my 05 was far from plug and play. Since you have the color screen, it may be plug and play for you though, in which case you would only need to purchase the ccu and camera and you are good to go. __________________ 2005 SE LED taillight conv Added OEM NAV Added 07 Gauge Cluster Added OEM Backup Cam

07-26-2011, 12:49 PM	#51 (permalink)
james0076ss Registered User Join Date: Apr 2008 Posts: 26	Thanks wastinu. Looks Like I'm pre-wired. Went to the dealership to see how much the CCU and camera cost and they wanted a whooping $879 for both. Still deciding on this mod. Hopefully ebay will have this one day (fingers crossed). __________________ 07" Murano IP S AWD w/ Leather 07" G35S OB 6MT w/ Nav, Prem, Tech, 4was

07-26-2011, 01:32 PM	#52 (permalink)
wastinu Registered User Join Date: Oct 2009 Location: Grande Prairie, AB Posts: 60	Hey James, ya dealership is WAY too expensive!! I got my parts from an auto recycler, but eBay is a great option as well. I think I paid $250 for both the ccu and camera. Our gen of Mo have been around long enough that you should be able to get used parts with some looking. Good luck with search!!! __________________ 2005 SE LED taillight conv Added OEM NAV Added 07 Gauge Cluster Added OEM Backup Cam

02-07-2012, 09:50 PM	#53 (permalink)
hydrothunder Registered User Join Date: Feb 2012 Posts: 2	I know this is an old post but I have been working on getting parts for this for a while now and am ready to work on this. My qestion is where exactly is the CCU wiring located. I have been able to put in the camera and the wiring for that was there now I am looking for the CCU wiring and am not exactly sure where that should be located (if it is there). Thanks for any and all help.

02-10-2012, 06:04 PM	#55 (permalink)
hydrothunder Registered User Join Date: Feb 2012 Posts: 2	I see those but can't tell where that is.

02-13-2012, 01:54 PM	#56 (permalink)
wastinu Registered User Join Date: Oct 2009 Location: Grande Prairie, AB Posts: 60	hydrothunder - see attached pic. It is right behind the carpeting I have highlighted with the arrow. Hope that helps. Attached Thumbnails __________________ 2005 SE LED taillight conv Added OEM NAV Added 07 Gauge Cluster Added OEM Backup Cam

03-11-2012, 04:31 PM	#57 (permalink)
james0076ss Registered User Join Date: Apr 2008 Posts: 26	Anybody know if other backup camera modules or actual backup camera is compatible, like the Nissa Altima would work on a 2007 Murano. From the look of it, it has the same connectors __________________ 07" Murano IP S AWD w/ Leather 07" G35S OB 6MT w/ Nav, Prem, Tech, 4was

03-11-2012, 04:34 PM	#58 (permalink)
S-N-I-P-E-R Registered User Join Date: Aug 2009 Posts: 84	Hey James, I'm not really sure mate!!! __________________ -=S-N-I-P-E-R=-

03-11-2012, 05:39 PM	#59 (permalink)
danf Registered User Join Date: Sep 2007 Location: Canada Toronto Posts: 57	I have the backup module out of an Armada and a camera out of a Q45. part numbers are SLIGHTLY off but I believe they may have supersessions on certain parts. Towards sniper- you wouldnt happen to know of any place i could get the plug from for the control module do you?

Remove Advertisements Sponsored Links
Nissan Murano Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread: