OEM Navigation Added to 2004 SL - Page 6 - Nissan Murano

srivick777 · 08-02-2010, 09:24 PM

Quote:

Originally Posted by ekaxel

Definitely not NCU connectors....

Hi,

Are you sure that the first picture cables are not for Navigation ?

Warhammer · 08-02-2010, 10:13 PM

The screen for the 06 shouldn't be different than the 04. I think they used the same screen for all the years. There was a part number change over the years but other than that, nothing new.

The only change that I could see between the years as far as connectors was for the back of the audio/ac unit. I'm not 100% sure about the connectors for the NCU. I'll look at the 06 Service Manual av.pdf section to check for sure.

ekaxel · 08-03-2010, 01:29 AM

The early screens probably didn't have the composite video input for the camera.

Warhammer · 08-03-2010, 10:20 AM

Was that an input to the DCU or the screen itself? I thought composite input was through the DCU.

ekaxel · 08-03-2010, 11:13 AM

Composite goes directly from the camera/camera control unit to the display

tru21 · 11-11-2010, 04:38 PM

I was thinking about doing this upgrade on my 03 and think I can get the parts but don't think I can get the connectors for the wiring harness. Does anyone know how I can go about getting the connectors so that I can make my own harness?

Warhammer · 11-12-2010, 10:52 AM

Not 100% sure where Nissan got the connectors. I just got the dash wiring harness and extracted the sub harness from there; reference first page and pictures.

I figure you can got o digikey, newark, or allied for connectors. Just not sure what to look under.

bennifer · 11-22-2010, 04:32 PM

Hi every I'm new to the forum
Warhammer: I'm so happy for you! btw I'm trying to look for a dvd/navg system for my 04 mo. Do you know if its possible for me to just bought a after market system and put it on? will it crash with my original system?

Warhammer · 11-23-2010, 11:01 AM

I'm honored. You picked my thread to for your first post!

There are multiple threads throughout this forum in regards to using aftermarket solutions. One member put in a Carputer, another put in another system that wasn't identified. The absolute best solution in my opinion for your setup is to relocate the original orange screen and put in your aftermarket navigation system. There are people that have relocated their original screen to the roof or below the 3 air control knobs.

Whatever way you go, if you want to go aftermarket, you need to make sure you relocate your original screen to keep its functionality. Then in a separate system, wire in your aftermarket navigation system. It won't have anything to do or interfere with your OEM setup.

bennifer · 11-24-2010, 01:18 PM

Quote:

Originally Posted by Warhammer

I'm honored. You picked my thread to for your first post!

There are multiple threads throughout this forum in regards to using aftermarket solutions. One member put in a Carputer, another put in another system that wasn't identified. The absolute best solution in my opinion for your setup is to relocate the original orange screen and put in your aftermarket navigation system. There are people that have relocated their original screen to the roof or below the 3 air control knobs.

Whatever way you go, if you want to go aftermarket, you need to make sure you relocate your original screen to keep its functionality. Then in a separate system, wire in your aftermarket navigation system. It won't have anything to do or interfere with your OEM setup.

LOL your thread was the reason I sign up to this forum. And thankyou very much for your time and advice!

350z006 · 01-13-2012, 01:59 PM

I was looking at a navi setup that came off an 07 SL (I have an 07 S) but the harness that comes with the navi includes connections for VDC and Intelligent key, which my Murano does not come with....can I still use this harness?

Also where can I find this excel spreadsheet?

08-02-2010, 10:13 PM	#77 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,420	The screen for the 06 shouldn't be different than the 04. I think they used the same screen for all the years. There was a part number change over the years but other than that, nothing new. The only change that I could see between the years as far as connectors was for the back of the audio/ac unit. I'm not 100% sure about the connectors for the NCU. I'll look at the 06 Service Manual av.pdf section to check for sure. __________________ *Ain't nothin' MO fun than drivin' a MO.*

08-03-2010, 01:29 AM	#78 (permalink)
ekaxel Super Senior Member Join Date: Jan 2004 Location: Portland, OR Posts: 2,164	The early screens probably didn't have the composite video input for the camera. __________________ '03 SL everything but OEM Nav Magellan Roadmate 1700 7" in dash Valentine One Black grille DrawTite 2" hitch & homemade harness Excalibur 1620 alarm Magnetbra Full spare tire Roof rails with crossbars Aluminum fuel tank shield Optima Red Top battery HID fogs/DRL 3 new door lock assemblies 235/65R17 Dean Wintercat snows Backup camera Parking sensor (IR) system GROM IPOD/USB/AUX audio interface with Bluetooth New CVT 1/12

08-03-2010, 10:20 AM	#79 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,420	Was that an input to the DCU or the screen itself? I thought composite input was through the DCU. __________________ *Ain't nothin' MO fun than drivin' a MO.*

08-03-2010, 11:13 AM	#80 (permalink)
ekaxel Super Senior Member Join Date: Jan 2004 Location: Portland, OR Posts: 2,164	Composite goes directly from the camera/camera control unit to the display __________________ '03 SL everything but OEM Nav Magellan Roadmate 1700 7" in dash Valentine One Black grille DrawTite 2" hitch & homemade harness Excalibur 1620 alarm Magnetbra Full spare tire Roof rails with crossbars Aluminum fuel tank shield Optima Red Top battery HID fogs/DRL 3 new door lock assemblies 235/65R17 Dean Wintercat snows Backup camera Parking sensor (IR) system GROM IPOD/USB/AUX audio interface with Bluetooth New CVT 1/12

11-12-2010, 10:52 AM	#82 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,420	Not 100% sure where Nissan got the connectors. I just got the dash wiring harness and extracted the sub harness from there; reference first page and pictures. I figure you can got o digikey, newark, or allied for connectors. Just not sure what to look under. __________________ *Ain't nothin' MO fun than drivin' a MO.*

11-11-2010, 04:38 PM	#81 (permalink)
tru21 Registered User Join Date: May 2010 Posts: 2	I was thinking about doing this upgrade on my 03 and think I can get the parts but don't think I can get the connectors for the wiring harness. Does anyone know how I can go about getting the connectors so that I can make my own harness?

11-22-2010, 04:32 PM	#83 (permalink)
bennifer Registered User Join Date: Nov 2010 Posts: 3	Hi every I'm new to the forum Warhammer: I'm so happy for you! btw I'm trying to look for a dvd/navg system for my 04 mo. Do you know if its possible for me to just bought a after market system and put it on? will it crash with my original system?

11-23-2010, 11:01 AM	#84 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,420	I'm honored. You picked my thread to for your first post! There are multiple threads throughout this forum in regards to using aftermarket solutions. One member put in a Carputer, another put in another system that wasn't identified. The absolute best solution in my opinion for your setup is to relocate the original orange screen and put in your aftermarket navigation system. There are people that have relocated their original screen to the roof or below the 3 air control knobs. Whatever way you go, if you want to go aftermarket, you need to make sure you relocate your original screen to keep its functionality. Then in a separate system, wire in your aftermarket navigation system. It won't have anything to do or interfere with your OEM setup. __________________ *Ain't nothin' MO fun than drivin' a MO.*

01-13-2012, 01:59 PM	#86 (permalink)
350z006 Registered User Join Date: Feb 2008 Posts: 21	I was looking at a navi setup that came off an 07 SL (I have an 07 S) but the harness that comes with the navi includes connections for VDC and Intelligent key, which my Murano does not come with....can I still use this harness? Also where can I find this excel spreadsheet?

Remove Advertisements Sponsored Links
Nissan Murano Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread: