So my broke seat, it busted in 2 places, front AND back.. What other p/n do I need? - Nissan Murano

JimKarczewski · 09-22-2011, 04:31 PM

So, reading all the other seat threads, I assumed all the problems fixed with 87473-CA01A were what I needed. Nope, I need that one AND I need the front bracket with the crossbar as well. So, anyone know the part number for that gem????

Here is the busted part on the right (facing the seat, on left when sitting in the seat)

Grease Monkey · 09-22-2011, 04:45 PM

Jim,

I'll look up the part number for you when I have some free time tonight after work. Until then, I'm positive that the part is listed in the parts listings here:
Nissan Murano OEM Parts

After selecting your model year, trim and options, go to the seat & seat belt section and you'll see all of the relevant parts listings as well as handy diagrams to accompany them.

For now, I have to return to work before the boss makes his rounds to my office

JimKarczewski · 09-22-2011, 05:00 PM

Thanks, I got to that before, but it doesn't show the breakdown, and I don't want to spend $700 on the whole assembly which is 450-CA09A ($782.81) It doesn't say that the back lifter is 87473-CA01A, Front lifter, ??????, etc... Just the whole assembly.

JimKarczewski · 09-22-2011, 05:13 PM

I sent an email to Nissan Parts Zone, since that's where I bought the back bracket to see if they could tell me what the front lifter assy number is...

JimKarczewski · 09-22-2011, 08:55 PM

Well, Nissan Parts zone wasn't of any help, they don't have a "Technical Support" dept. Great... Gotta see if a dealer is of any help now.. unless someone else knows the part #.

intrglctcrevfnk · 10-06-2011, 10:13 PM

I believe that that is one gigantic part. I replaced mine due to the busted rear first. After the 1 year warranty ran out, the exact same break you have happened on mine. I fixed it with a nalgene bottle!

I have been planning to just have a friend weld it sometime. Only problem is that I need to disassemble it and get it out of my MO unless I want burn marks all over the carpet. That is why I am taking so long to get it done. Doesn't bother me though. The Nalgene Bottle was just the right height.

Perhaps you can find that part, but I don't think nissan supplies only the front.

09-22-2011, 04:31 PM	#1 (permalink)
JimKarczewski Registered User Join Date: Apr 2010 Location: NW Indiana Posts: 13	So my broke seat, it busted in 2 places, front AND back.. What other p/n do I need? So, reading all the other seat threads, I assumed all the problems fixed with 87473-CA01A were what I needed. Nope, I need that one AND I need the front bracket with the crossbar as well. So, anyone know the part number for that gem???? Here is the busted part on the right (facing the seat, on left when sitting in the seat)

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

09-22-2011, 04:45 PM	#2 (permalink)
Grease Monkey Registered User Join Date: Jul 2011 Posts: 11	Jim, I'll look up the part number for you when I have some free time tonight after work. Until then, I'm positive that the part is listed in the parts listings here: Nissan Murano OEM Parts After selecting your model year, trim and options, go to the seat & seat belt section and you'll see all of the relevant parts listings as well as handy diagrams to accompany them. For now, I have to return to work before the boss makes his rounds to my office

09-22-2011, 05:00 PM	#3 (permalink)
JimKarczewski Registered User Join Date: Apr 2010 Location: NW Indiana Posts: 13	Thanks, I got to that before, but it doesn't show the breakdown, and I don't want to spend $700 on the whole assembly which is 450-CA09A ($782.81) It doesn't say that the back lifter is 87473-CA01A, Front lifter, ??????, etc... Just the whole assembly.

09-22-2011, 05:13 PM	#4 (permalink)
JimKarczewski Registered User Join Date: Apr 2010 Location: NW Indiana Posts: 13	I sent an email to Nissan Parts Zone, since that's where I bought the back bracket to see if they could tell me what the front lifter assy number is...

09-22-2011, 08:55 PM	#5 (permalink)
JimKarczewski Registered User Join Date: Apr 2010 Location: NW Indiana Posts: 13	Well, Nissan Parts zone wasn't of any help, they don't have a "Technical Support" dept. Great... Gotta see if a dealer is of any help now.. unless someone else knows the part #.

10-06-2011, 10:13 PM	#6 (permalink)
intrglctcrevfnk Registered User Join Date: May 2007 Location: Memphis Posts: 42	I believe that that is one gigantic part. I replaced mine due to the busted rear first. After the 1 year warranty ran out, the exact same break you have happened on mine. I fixed it with a nalgene bottle! I have been planning to just have a friend weld it sometime. Only problem is that I need to disassemble it and get it out of my MO unless I want burn marks all over the carpet. That is why I am taking so long to get it done. Doesn't bother me though. The Nalgene Bottle was just the right height. Perhaps you can find that part, but I don't think nissan supplies only the front.

Remove Advertisements Sponsored Links
Nissan Murano Forums Advertisement