Whats this- Woops - Nissan Murano

doobabe25 · 01-31-2012, 09:04 PM

I think I ordered the wrong part....

Ok- I ordered the correct piece for the front (looks like a mud flap) per your recommendations (THANK YOU!) BUT I think I had the other piece wrong. It would cover the oil filter area behind the front passenger wheel- I think it is an engine splasdh shield? Not sure What Nissan calls it or where to find one. Help please!

Borederdude · 02-14-2012, 09:17 PM

Missing the same thing... don't know what it's called but it flew off on the high way and makes the belt screech in rain.

Warhammer · 02-15-2012, 11:03 AM

Ooooh, wait a minute. That's the passenger side wheel well you have to remove to get to the oil filter! I'll look for the part number. It takes 4 plastic clips to hold it in. 2 of them go into the holes you show vacant in the picture. I stared and stared at this picture and could not figure it out.

The light finally went on after your last post!

Warhammer · 02-15-2012, 11:37 AM

FOUND IT!

You're going to need the following parts:

Right Wheel Well Engine Cover: 64838-CA000
Generic Plastic Push Clips: 01553-09321

I tried to look at www.worldpartsexpress.com and didn't find it. Think I found them on Ebay though.

Cover: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
Clip: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

The prices at my dealership seem to match the prices online so I'd just order it there. Make sure they don't bend you over the barrel for price. Should be no more than $50 for the fender splash guard and about $1 each for the push clips.

It's easy install. Good luck!

Warhammer · 02-15-2012, 11:38 AM

FOUND IT!

You're going to need the following parts:

Right Wheel Well Engine Cover: 64838-CA000
Generic Plastic Push Clips: 01553-09321

I tried to look at World Parts Express and didn't find it. Think I found them on Ebay though.

Cover: eBay - Murano RT Wheel Well Splash Guard
Clip: eBay - Plastic Push Clip 50qty

The prices at my dealership seem to match the prices online so I'd just order it there. Make sure they don't bend you over the barrel for price. Should be no more than $50 for the fender splash guard and about $1 each for the push clips.

It's easy install. Good luck!

01-31-2012, 09:04 PM	#1 (permalink)
doobabe25 Registered User Join Date: Nov 2011 Location: WI Posts: 25	Whats this- Woops I think I ordered the wrong part.... Ok- I ordered the correct piece for the front (looks like a mud flap) per your recommendations (THANK YOU!) BUT I think I had the other piece wrong. It would cover the oil filter area behind the front passenger wheel- I think it is an engine splasdh shield? Not sure What Nissan calls it or where to find one. Help please! Attached Thumbnails __________________ 2004 Nissan Murano SL AWD Sunlit Copper Metallic/ Orange leather

02-15-2012, 11:03 AM	#3 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,421	Ooooh, wait a minute. That's the passenger side wheel well you have to remove to get to the oil filter! I'll look for the part number. It takes 4 plastic clips to hold it in. 2 of them go into the holes you show vacant in the picture. I stared and stared at this picture and could not figure it out. The light finally went on after your last post! __________________ *Ain't nothin' MO fun than drivin' a MO.*

02-15-2012, 11:37 AM	#4 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,421	FOUND IT! You're going to need the following parts: Right Wheel Well Engine Cover: 64838-CA000 Generic Plastic Push Clips: 01553-09321 I tried to look at www.worldpartsexpress.com and didn't find it. Think I found them on Ebay though. Cover: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices Clip: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices The prices at my dealership seem to match the prices online so I'd just order it there. Make sure they don't bend you over the barrel for price. Should be no more than $50 for the fender splash guard and about $1 each for the push clips. It's easy install. Good luck! __________________ *Ain't nothin' MO fun than drivin' a MO.*

02-15-2012, 11:38 AM	#5 (permalink)
Warhammer Registered User Join Date: Jun 2008 Location: Rio Rancho, NM Posts: 2,421	FOUND IT! You're going to need the following parts: Right Wheel Well Engine Cover: 64838-CA000 Generic Plastic Push Clips: 01553-09321 I tried to look at World Parts Express and didn't find it. Think I found them on Ebay though. Cover: eBay - Murano RT Wheel Well Splash Guard Clip: eBay - Plastic Push Clip 50qty The prices at my dealership seem to match the prices online so I'd just order it there. Make sure they don't bend you over the barrel for price. Should be no more than $50 for the fender splash guard and about $1 each for the push clips. It's easy install. Good luck! __________________ *Ain't nothin' MO fun than drivin' a MO.*

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

02-14-2012, 09:17 PM	#2 (permalink)
Borederdude Registered User Join Date: Feb 2012 Posts: 1	Missing the same thing... don't know what it's called but it flew off on the high way and makes the belt screech in rain.

Remove Advertisements Sponsored Links
Nissan Murano Forums Advertisement