New regulator and motor driver window question

[mhinz000]

So my regulator and window motor went bad on the driver side of my 03. i replaced the parts finally this afternoon, and its great however, i have a weird issue. i can auto the window down just fine, and manually hold the button upward til the window stops. when i auto up the window, it goes all the way up then shuts, then comes back down like 4 inches and stops. in the manual i read that before installing the motor to plug it into power and roll down the window for approx 5 secs. which i did. so i was just wondering if anyone else has experienced this issue. any help would be great! thanks

[nitely]

You need to reset the window regulator. Look here....Resetting Window Regulator

and here.......2003-2005 Infiniti G35 Coupe Power Window Reset Procedure | Infinitihelp.com

Heres from the FSM..........http://www.nicoclub.com/FSM/murano/2003/gw.pdf

Good luck.

[mhinz000]

awesome thanks for the help man, i will give this a try this afternoon!

[cmathews]

My 01 Pathfinder did the same thing and I had the tech's reset my regulator and no longer have the problem.

Good luck

[mhinz000]

which program are you referring to?

[cmathews]

auto check put program. Meant problem

[mhinz000]

gotcha

[mhinz000]

so ive been tryin to reset the window motor with no luck, followed the instructions and trying different variations but to no avail. any other insights?