| virux |
So I purchased new speaker sets for my car.
Infinity Kappa 62.7I for my back
Infinity Kappa 692.7i for my front
Infinity Kappa 10.7t for my dash
They all come with the inline crossovers as you know.
The questions is, how should i wire my speakers to the crossover and crossovers to my speaker wires? as in parallel or series?
I was thinking about going to the shop and just let them deal with the work of taking off he panel and all but since im going to install dynamats on my door panel I might as well do it myself but I want to make sure I do it correctly. I read this article on crossovers and it got me confused.
Do I even need the crossovers? My MTX TA 3404 comes with crossover feature.
Thanks in advance! |
|
|
| biggun |
| Based on Crutchfield, each crossover has a 12" input lead terminated with bare wire and two 20" output leads, one for the woofer and one for the tweeter, terminated with female quick-slides. The female quick-slides connect to the male quick-slides on the speaker. The positive terminal on the woofer is 0.248" and the negative is 0.191". The positive terminal on the tweeter is 0.205" and the negative is 0.111". |
|
|
| virux |
| yeah i figured out how it works now after looking at the online manual. one last question I want to confirm is that i was told tweeters do not affect the impedence so basically my front speakers will still stay at 2 ohms instead of 4 ohms correct? |
|
|
|
