| tommy2684 |
Hey All,
I am having a VERY difficult time running the power wire for my new AMP to power my subs. I know there are already 2 places where I can run the wires through the firewall. From the engine bay, there is a gromet on the top right and from inside the car, there is a gromet to the left of the brake pedal.
They are both impossible to get your hand there to run a wire!!! Has anyone had success doing this? If so, exactly how did you do it!!
Thanks in advance! |
|
|
| DMordarski |
| coat wire or a rigid wire and electrical tape |
|
|
| BikerJohn |
Coat hanger will work.
I used an Electricians Fish Wire and pushed it in from the Engine Bay into the car. Then attach your power line to the coat hanger/fish wire and use electical tape to secure them together. Pull from the engine bay little at a time with even pressure.
I made a small slit with a utility knife just above the center of the gromet(where the other wires ran through) so that I can run my 4Ga. wire through the flat area of the gromet.
A little dish soap around the gromet helps pull the new line too.:4: |
|
|
| njjoe |
tommy2684-
You can always do what this guy did and install a power source in the rear....
-njjoe |
|
|
| tommy2684 |
| Thanks all! I got it through! |
|
|
| BikerJohn |
quote:
Originally posted by njjoe
tommy2684-
You can always do what this guy did and install a power source in the rear....
-njjoe
:21: :21: :21: :21: :21: :21: |
|
|
| n8wrl |
quote:
Originally posted by tommy2684
Hey All,
I am having a VERY difficult time running the power wire for my new AMP to power my subs. I know there are already 2 places where I can run the wires through the firewall. From the engine bay, there is a gromet on the top right and from inside the car, there is a gromet to the left of the brake pedal.
They are both impossible to get your hand there to run a wire!!! Has anyone had success doing this? If so, exactly how did you do it!!
Thanks in advance!
What year Murano do you have? I've been trying to find the gromets you describe in my 2009 without much luck. There is a pass-thru behind the brake pedal but it is mechanical - I don't want to try to fish a wire thru there.
??
Thanks!
-Brian |
|
|
|
