| GripperDon |
| Mine has the connector cut off (they come with the unit) the wire stubs are in them so you can connect them back appropiately. I had to do that beacuse I connected it in the rear. Now with Generators XBOX on the way I must connect in the front and am going to get a new unit. This one worked perfect, probably5 hours use. 1/2 Price including shipping. $45. |
|
|
| Snow MO |
Grip,
Just out of curiousity, why did you mount it in the back? What's the pros of having this setup? |
|
|
| jaak |
| It's good if you are uncomfortable with pulling out the radio to get to the connector on the back. |
|
|
| GripperDon |
Thanks to JAAK for getting all that wireing stright on that.
Now I have to take off the front dash for the generator x-box and No-Nag and new PAC unit. CAN'T WIN! |
|
|
| folgersoldier |
I'll take it if no one has dibs on it.
From your description the connector that was cut off is included and there is enough wire sticking out of it to put it back together?
This allow you to connect up an MP3 player right?
Thx,
Jason |
|
|
| GripperDon |
| No! there is enough wire to identify what color goes where but in some cases NOT to solder to. Taking the connector apart and rewiring would be required. Probably best for a Techie Type. |
|
|
| folgersoldier |
That should be no problem.
Any chance of some pictures?
jasonroux@hotmail.com
Check out my ebaystore www.ebaystores.com/mlinesales
We may do Murano seat covers (upholsetered not slip on) one day and you seem to be into customizing.
Thx,
Jason |
|
|
| GripperDon |
| I tried to make picture these are about best I could do. |
|
|
| GripperDon |
| And this. PS went to your ebay site , you ARE the Jet Ski Seat Man! |
|
|
| GripperDon |
| Turns out that I also have a double ended cable with a plug at each end that came with the PAC unit. So the are 4 connectors all together. one set wired to each other with about 6 inches of cables between them. |
|
|
| folgersoldier |
I'll take it gripper. Do you paypal?
Thx,
Jason |
|
|
| GripperDon |
| YES I DO! I'll PM you, PM me with address. I'll package everything and send it ASAP. |
|
|
| jaak |
| Let me know if you have questions about the wiring or how the connector shells come apart so you can get to the pins better.:D |
|
|
| folgersoldier |
Jaak,
How do they come apart? I will probably put it together as soon as I get it - always have to pley with the newest toy. From the sounds of it I will have to remove the pins and resolder them onto the wires.
Thanks again Gripper.
Jason |
|
|
| GripperDon |
JaaK, Jason FYI,
the two big connectors that the red power wire with the splice that comes out of are still wired together. |
|
|
| jaak |
I have to look at it again, to refresh my memory, but there's a retainer clip that comes off (or maybe not, maybe I'm thinking of one of the other connectors. I have to double check!), then two parts on the wire side of the shell rotate out of position to release the pins.
I might be able to post a detailed picture late today or tomorrow.
In the meantime, here's a picture of the same style of shell from Yazaki's website. Here you can see it before the part at the wire end has been bent in to lock the pins. |
|
|
| GripperDon |
| Since I just got the new one I'll post some color pictures of it all wired together to help also. |
|
|
| jaak |
I'm at the wrong PC, as I have more pictures, but just not here.
But here's one from another thread.
 |
|
|
| jaak |
Hmm... I'd have to take another pic to get more detail. Let me know if you need it.
For fun, here's what it looks like inside. |
|
|
| folgersoldier |
Thx Grip, great deal.
As far as the pictures go - can I get a close up of the end that plugs into the radio - not the one for the power wire. I have one extra black wire on the plug end that has no corresponding wire - ie it looks like one black goes to the multiconductor wire - one goes to the single wires and I have one more that was cut on the plug end that needs to be reconnected - was there a loopback?
Thx,
Jason |
|
|
| GripperDon |
| This seems to be the best my camera will do. |
|
|
| folgersoldier |
Ok, It looks like its a drain wire for the multiconductor cable. The way I am looking at it the pins are like this:
Empty Empty
Red White - (from mutliconductor)
Black - (from multiconductor)
Empty
Black - (drain wire from multiconductor)
Black - (single wire)
Grey Grey with black stripe
White White with black stripe
Would like to make sure as I'm not sure about the drain.
Thx,
Jason |
|
|
| GripperDon |
Here is how I see then going down on the side by the clip (left) first
empty
Solid red , multi conductor wire
Then the clip area
Grey, seperate wire
White, seperate wire
Now on the right side going down
Empty
White, multi conductor wire
Black,multi wire
empty
grey with white writeing, multi wire
black, seperate wire
Grey,black stripe,seperate wire
white, black stripe, seperate wire |
|
|
| folgersoldier |
Thx Grip,
Ok, sounds like that wire is the drain (fourth wire from the bottom on the right). Sorry about my last post above. Evidently what you see is not what you get when you post.
Thx,
Jason |
|
|
| GripperDon |
| How is it coming? FolgerSoldier |
|
|
|
