| zebelkhan |
| Does anyone have any ideas on where I can get some original wiring connectors for a MO. Dealer sells wiring harnesses only and that will prove too expensive and I have not been able to locate a junk yard with late model Nissans near where I live. I need to replicate the connector that plugs into the non Nav LCD, and the plug that is on the LCD itself. Thanks in advance. |
|
|
| jaak |
They're tough to come by and carry a minimum quantity of 1,000. How many thousands do you need?
I think some of them may be Molex, but many are Yazaki.
I understand that Nissan sells a connector repair kit to the dealers, so this may be an alternate path. Go ask your dealer what they do. |
|
|
| ekaxel |
| Go to a junkyard with a pair of cutters and get what you need. You would probably have to do a lot of soldering though. |
|
|
| zebelkhan |
| Thanks for the input guys. Junkyard idea is out cause none have late model nissans that will let me cut plugs off of. I will try the plug repair kit idea. Didn't know they had them. :p |
|
|
| Dalite |
Have you tried Crutchfield or Circuit City to see if they have any adapter cables for connecting aftermarket head units to the factory wiring?
They sell these for many cars and stereo units to prevent having to cut wires. |
|
|
| zebelkhan |
quote:
Originally posted by Dalite
Have you tried Crutchfield or Circuit City to see if they have any adapter cables for connecting aftermarket head units to the factory wiring?
They sell these for many cars and stereo units to prevent having to cut wires.
No I have not. I sort of have given up on the idea, actually decided to wait a bit longer until MOs finally show up at the junkyards and buy the pig tail. But you are right. Thanks for the tip. I will check with them. |
|
|
| GripperDon |
| If you can find the "suppliers" part # I may be able to get you one. |
|
|
| KE20Sprinter |
Amazing what you find in the Manual...Pg. GI-23
Kent-Moore tools
Part No. J38751-95NI
Connector & Terminal Pin Kit
Don't know where they sell it (or how much is it), but here's the number to kent moore (800) 345-2233...Search kent-moore in the web & you'll find their website.
WiL |
|
|
| KE20Sprinter |
Wow...Just found out the price on the pin terminal kit...$3,156.19.
Spoke to the tech guy @ kent-moore, and said they do sell connectors in packages of 10, but I need to find the part numbers at the dealer :mad:
WiL |
|
|
| GripperDon |
| Anybody gone to the parts departmwnt at the dealer and "Talk real Nice" with a $Tip? |
|
|
| jaak |
| And watch their eyes glaze over as you talk.... |
|
|
| GripperDon |
| If you canget the particular part # ( Kent-Tools) I can contact The rep. in Detroit and see what I can do. :) it's possible I used to get samples (typically they would send a 25 to a 100.) |
|
|
| iiiwabibitoiii |
| does anyone know the part number for this 24 pin plug? Thanks |
|
|
|
