| erik5032 |
| Ok... so im buying a '04 Nissan Murano SL with 32k miles for 16.5. I do not wanna be like my pops and take it to the dealer for every oil change, filter change etc. So if any of u have any suggestions on the tools ill need to start learning (bought a ratchet set (husky)). thanks for the advice and have a good one. |
|
|
| Eric L. |
You already have a socket set, but I'd also recommend
1) a good screwdriver set
2) a torque wrench
3) a large floor jack
4) four jack stands
5) a work light, preferably one of those with a magnet mount so you can stick it anywhere
6) lots of shop rags
Thats about all you'll need to get started - oh also get yourself a copy of the factory shop manual - you can download it from Nissan for $20 (there is a link on a sticky here somewhere). |
|
|
| Stoker |
Congrats on your Mo, I know that you will enjoy the ride, I have had my 03 for 3-years. The best thing that you could install on your Mo for oil changes is a Fumoto oil pan drain valve. (www.fumotovalve.com)
I have one on each of my cars and I can change my oil and filter without using tools.
For tools, I would recommend to get a small set of metric (6-18MM) wrench's and sockets would be all that you require. The best place in my opinion would get them from Sears, they usually have sets on sale from time to time. |
|
|
| njjoe |
Indispensable...
-njjoe |
|
|
| biggun |
On par with njjoe's advise, I would highly recommend latex gloves, which are what I use, or a good pair of mechanic gloves.
Also, an oil pan to catch the oil and other parts that may accidentally fall.
Simple Green - a safe degreaser for engines and to clean up spills, remove spots off of carpets, and etc. (also highly recommended).
Safety glasses
Congrats and good luck! |
|
|
| Nathan @ NBO |
| Props for taking the initiative to learn that type of stuff on your own. Yea I would say get some mechanic gloves (they will save your fingers from many bloody cuts and bruises) as well as a basic plyer set with some snips, and maybe a crescent wrench and a set of some open ended/box ended wrenches for those tight areas. |
|
|
| Corin |
My advice is to find a friend or neighbor who does THEIR own maintenance, and ask them to help you with your first oil change. Have them show you the tools they use, and even use their tools for the first time if they'll let you.
That way you know you're doing it right the first time, and you can learn what you need or don't need for your particular vehicle.
There are some key things that can make the jobs easier, like ramps and a creeper, but nothing is better than having someone walk you through things personally. |
|
|
|
