Nissan Murano Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter #1
I got a pac-oem-2
http://www.crutchfield.com/S-7pLQhVvkPtW/cgi-bin/ProdView.asp?g=751&I=127OEM2
to convert the headunit to pre-amp level (rca signals) i soldered the input wires with the scosche rb & b connectors, jaak gave me a diagram on how to connect it and i did.. but now that i plugged it to test my amps and speakers out.. it does not turn on? I'm thinkn gthat its the the pac-oem-2 not sending a signal to the amps....

anyone know what it could be besides the remote turn-on the pac oem-2 not sending a signal to turn on my amps?
here's the diagram i followed with the exception that I used the RCA outputs provided by the pac oem-2.

http://www.nissanmurano.org/photopost/showphoto.php?photo=2309&size=big&papass=&sort=1
 

·
Registered
Joined
·
53 Posts
I think the amp signal of the PAC only works when in SAT mode.
If you have the Bose, use the remote amp wire from the radio. If you don't have the Bose, such as I, hook to the ignition.
 
1 - 2 of 2 Posts
Top