Nissan Murano Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
Hi guys,

After couple of weeks research I was lucky enough to find a simple way of making my steering wheel controls work with my aftermarket Android head unit.

There are 3 white connectors - see pic.
Nissan ISO adapters - attached.jpg
The one in the background is a 16 pin connector and this is where we do the following - from the cable that came with your aftermarket unit:

1. Connect GROUND to Green/Black cable
2. Connect KEY1 to Green/White cable
3. Connect KEY2 to Green or Lime cable
4. Start the car and configure steering wheel controls inside your settings.

How to connect SWC Nissan Murano 2006.jpg

Voila, you now have steering wheel controls. I know this works on European models (all gen1).

Enjoy!
 

·
Registered
Joined
·
1 Posts
Hi guys,

After couple of weeks research I was lucky enough to find a simple way of making my steering wheel controls work with my aftermarket Android head unit.

There are 3 white connectors - see pic.
View attachment 52039
The one in the background is a 16 pin connector and this is where we do the following - from the cable that came with your aftermarket unit:

1. Connect GROUND to Green/Black cable
2. Connect KEY1 to Green/White cable
3. Connect KEY2 to Green or Lime cable
4. Start the car and configure steering wheel controls inside your settings.

View attachment 52040

Voila, you now have steering wheel controls. I know this works on European models (all gen1).

Enjoy!
Did this require a SWC module?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Did this require a SWC module?
As the post title states, no modules are required. This is a direct connection. All you need to do is to map the steering wheel buttons on your Android Head unit once the physical connection is done.
 
1 - 3 of 3 Posts
Top