Nissan Murano Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
12,512 Posts
infinity-

Looks good. Send us a photo of the entire front-end so we can better appreciate the effect.

-njjoe
 

·
Registered
Joined
·
27 Posts
Discussion Starter #5
licent plate holder

I just cut the corner plastic tray of both side and tap to the upper part then finish with black tap.
 

Attachments

·
Registered
Joined
·
27 Posts
Discussion Starter #6
lower grill

I used the platic net and insert at front. No need to take any part off, but need to drill the hold and tie the net to lower grill.
 

Attachments

·
Registered
Joined
·
4,077 Posts
Re: licent plate holder

infinity said:
I just cut the corner plastic tray of both side and tap to the upper part then finish with black tap.
I assume you mean tape, but where is the plastic piece from?
 

·
Premium Member
Joined
·
2,049 Posts
I still don't understand how he got the screen to stay in there.
It looks great though!

I have some black powdercoated aluminum ready for insertion....but I'll be danged if I know how to get it in there without removing the entire front end.
 

·
Registered
Joined
·
2,057 Posts
All you need to do is remove the grill...well theres a few top pieces that have to come off first then the grill comes off, but once the gril is off you have access to that area. Knew I should have taken pictures when I put in my bugdicer in the 06. How you fasten it in place may be interesting but it can be done with a little ingenuity.

http://www.nissanmurano.org/forums/showthread.php?s=&threadid=534
 

·
Registered
Joined
·
12,512 Posts
infinity-

:29: Nice job!

-njjoe
 

·
Mr. 3 K, 3/3/5. 5K,10/5/7
Joined
·
4,994 Posts
It hot enough in Yuma to Grill those bugs

:2:
 
1 - 19 of 19 Posts
Top