Nissan Murano Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi everyone.

I was replacing my ABS/Speed sensors on my 2011 Murano, (ABS, AWD, traction control lights on). Last one to do was the passenger side rear. The connector is near impossible to get at, does anyone have any tips?

Thanks,

Guy
 

·
Registered
Joined
·
621 Posts
Hi everyone.

I was replacing my ABS/Speed sensors on my 2011 Murano, (ABS, AWD, traction control lights on). Last one to do was the passenger side rear. The connector is near impossible to get at, does anyone have any tips?

Thanks,

Guy
This is a bit late, but looking at the diagram it appears that the harness connector is mounted on top of the rear subframe near the upper control arm. That is a tough spot. One option would be to drop the rear subframe enough to get to the connector. Another possible option although I'm not sure if it would help is to drop the EVAP canister just behind the subframe and see if you can get at it that way. Nevertheless, let us know how you got it.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I ended up cutting & splicing the new sensor into the old wire. Not the best method, but it worked. All lights gone out now.

thanks,

Guy
 
1 - 3 of 3 Posts
Top