Nissan Murano Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Looking to get a Murano, but only if I can modify it's appearence. I can't find any pics of a lowered Murano??? Do they use coil springs in the front & leaf springs in the rear?? Any vehicle can be lowered, I'd just like to figure out how low it can go before I purchase.
Any support is appreciated.
Thanks!
 

·
Premium Member
Joined
·
2,049 Posts
There are spring kits for lowering I think an inch to 1.5 inches.
Your ride quality will suffer because more sophisticated shocks are not being made.
If someone would make some quality stiffer anti-sway bars , I'd be all over them. But then of course, washboard in turns would be worse.
As with anything, you rarely get one great return without giving up something else.
Until someone comes out with some heavy duty shocks for the Mo, altering the suspension will have negative effects.
 

·
Registered
Joined
·
12,512 Posts
susiep642-

Check out the following link (japanparts.com):

http://www.japanparts.com/db/partslist.php?dealer=5&car=72&middlesmall=3:9&maker=&volkey=

They have a "G-ATTACK S-tune SUSPENSION KIT" that claims to lower the suspension approximately 1.2". It lists for $1,005.

I don't think you can get much lower than that without dangerously affecting the handling.

Good luck and send us photos if you do decide to purchase the MO and modify it.

-njjoe
 
1 - 4 of 4 Posts
Top