Does anyone know if there is a way to change the power lock setting. Right now it's setup to unlock the doors when the car is turned off. Is there a way to change that setting to unlock once the vehicle is put in park?
Power door lock setting
pontiac69
1 - 20 of 85 Posts
Joined
·
170 Posts
I Am with you. I wish there was a way have them unlock when put into park, but haven't found one.
Sent from AutoGuide.com Free Apppic of had to remove clips
Sent from AutoGuide.com Free Apppic of had to remove clips
I found the answer, but it was in my 2010 Maxima owner’s manual.
This was taken from 2015 Murano Owner's Manual with my Maxima information 3a added in red.
AUTOMATIC DOOR LOCKS
● All doors lock automatically when the vehicle
speed reaches 15 MPH (24 km/h).
● All doors unlock automatically when the ignition
switch is placed in the OFF position.
The automatic unlock function can be deactivated
or activated. To deactivate or activate
the automatic door unlock system, perform
the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Within 20 seconds of performing Step 2,
push and hold the power door lock switch to
the position (UNLOCK) for more than
five seconds.
3a. To change AUTO LOCK setting: push and hold
the power door lock switch to the (LOCK) poisiton
for more than 5 seconds.
4. When activated, the hazard indicator will
flash twice. When deactivated, the hazard
indicator will flash once.
5. The ignition switch must be placed in the
OFF and ON position again between each
setting change.
When the automatic door unlock system is deactivated,
the doors do not unlock when the ignition
switch is placed in the OFF position. To unlock
the door manually, use the inside lock knob or the
power door lock switch (driver’s or front passenger’s
side).
NOTE:
The automatic door unlock function can be
changed using the Vehicle Settings in the
vehicle information display. The “Selective
Unlock” choices are:
● ON
● OFF
Joined
·
227 Posts
Thank you very much for this !
I think the choices are: The doors lock automatically or the doors will only lock when you lock them.
Joined
·
35 Posts
I just took my 2015 Murano into the dealer today and they reprogrammed the doors so they unlock when I put the car in Park.
No more fumbling for the door lock switch to hop out of the car to check the mailbox on the way home.
My Service Department said it can't be done? Could you possibly tell me who your dealer is and I will call them to ask what mine is doing wrong?I just took my 2015 Murano into the dealer today and they reprogrammed the doors so they unlock when I put the car in Park.
No more fumbling for the door lock switch to hop out of the car to check the mailbox on the way home.
Joined
·
907 Posts
It's a simple computer hookup that gives 4 options for locking/unlocking the doors. Mode 2 is the option that unlocks automatically when put in park and locks when taken out of park, assuming gen 3 is the same. My dealer did not know about it either when I first brought in my 09 but they did some research and found out how. They also did my 14. Takes less than 15 min to do. I may have been the first to request it done at my dealer so it's possible your dealer doesn't know it can be done. Just be persistent, it's better for all that they be informed of what can be done on the vehicle and you'll be the one to do it :29:
Awesome and thanks for the great info. I will be asking for the same.
Okay then. I see you have a 14 and had an 09 so you have had 2 Gen 2's. My 11 they did it on but they told me this one they couldn't. I assume from the other posts others are being told the same. I thought you had a 15'. No big deal and thanks for the info.
Joined
·
907 Posts
Pontiac said he just had it done at the dealer. I'm willing to bet they do it the same way as the 2nd gen. If you can try another dealer.Okay then. I see you have a 14 and had an 09 so you have had 2 Gen 2's. My 11 they did it on but they told me this one they couldn't. I assume from the other posts others are being told the same. I thought you had a 15'. No big deal and thanks for the info.
Joined
·
35 Posts
I had mine done at Woodmen Nissan in Colorado Springs, CO
Woodmen Nissan
Service Center
6840 Vincent Drive,
Colorado Springs, CO 80918
Service: (888) 441-8092
Email: service@woodmennissan.com
Phone
Sales 855-852-1199
Service 888-577-6439
Parts 855-852-1199
Thanks for catching. I will give it a shot!
Thanks!
Just found this setting on the user manual
in chapter 3-6 Pre-driving checks and adjustments
AUTOMATIC DOOR LOCKS
● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
● All doors unlock automatically when the ignition switch is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than five seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information display. The “Selective Unlock” choices are:
● ON
● OFF
in chapter 3-6 Pre-driving checks and adjustments
AUTOMATIC DOOR LOCKS
● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
● All doors unlock automatically when the ignition switch is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than five seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information display. The “Selective Unlock” choices are:
● ON
● OFF
Thanks Blinky for keeping on me. I called my Service department. My regular service gal went to another tech and he found it can be done!! So she said she yelled at the original one and called him stupid and I am going to have it done next oil change. LOL
1 - 20 of 85 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
