Nissan Murano Forum banner
21 - 40 of 85 Posts
Thanks Blinky for keeping on me. I called my Service department. My regular service gal went to another tech and he found it can be done!! So she said she yelled at the original one and called him stupid and I am going to have it done next oil change. LOL
Glad to hear:29:
 
Was near the dealership and they weren't busy. I am happy to report my Doors now UNLOCK when I shift into park. Go get it done!!
 
State Line Nissan
Kansas City, MO

Nina is my S.A.
Who is probably going to murder me if she gets 45 calls on this from all over the country LOL
 
Bay Ridge Nissan Brooklyn New York Good Luck and don't give up
 
I gave my dealer a list of the dealers you guys provided me with and they ignored it. They instead contacted Nissan and got instructions from the "system designer". Two weeks later I'm still waiting on them to figure this out. They wanted to try it on a Murano in their lot first.
Sure would like to grab this "system designer" by the neck if he did the nav system !
 
Got mine programmed at Willowbrook Nissan in NJ. It took about 10 minutes.....SOOOO much better
to have the doors unlock when put in park!
I guess I am different . . . I would never want my door locks to unlock in park! Lots of times I put it in park and I am not getting out of the car, right away! For all your wives who worry about car jackings & stuff, here is a golden opportunity for them! Then ya gotta' re-lock the damned doors again . . .
 
Dealership told me that it couldn't be done. Went to NicoClub site and downloaded dlk.pdf. Printed page DLK-24, went to the dealer, friend plugged up the computer and we found that MODE 2 does the trick. Show the picture I attached to your dealer tech if they need a reference.
 

Attachments

Dealership told me that it couldn't be done. Went to NicoClub site and downloaded dlk.pdf. Printed page DLK-24, went to the dealer, friend plugged up the computer and we found that MODE 2 does the trick. Show the picture I attached to your dealer tech if they need a reference.

I took mines to the dealer today and told him it would be MODE 2 but once I left the dealer I noticed it only unlocks the driver door on park. Is it supposed to be only driver or all doors? Thanks in advance!!!
 
Dealership told me that it couldn't be done. Went to NicoClub site and downloaded dlk.pdf. Printed page DLK-24, went to the dealer, friend plugged up the computer and we found that MODE 2 does the trick. Show the picture I attached to your dealer tech if they need a reference.
Took mine to the dealer Saturday and the technician started looking through menu settings on the car. I had to show him the pic you attached and that's when it "clicked" with him.

Thanks!
 
  • Like
Reactions: Grey1
Took mine to the dealer Saturday and the technician started looking through menu settings on the car. I had to show him the pic you attached and that's when it "clicked" with him.

Thanks!
Really glad that I could help someone else. A picture can be worth a thousand words. I also gave a copy to the other dealership that told me it couldn't be done in case someone besides myself asked.
 
Could the folks that have ALL 4 Doors unlocking sound off? I need to know what model you have. Mine is a Platinum and the dealer says the only option is either NO DOORS UNLOCK..Or the DRIVERS SIDE ONLY and they state it's model specific which I find hard to believe.
 
Could the folks that have ALL 4 Doors unlocking sound off? I need to know what model you have. Mine is a Platinum and the dealer says the only option is either NO DOORS UNLOCK..Or the DRIVERS SIDE ONLY and they state it's model specific which I find hard to believe.
Even with the picture the "Tech" couldn't figure it out? Geez. Mine is an SL, but it doesn't matter. I did the same thing with my 2011 Juke. This isn't a new option for Nissans.

The instructions that I have attached actually say "All doors are unlocked when shifting the selector lever from any position other than P to the P position". Look under "P Range Interlock Door Unlock" in the attachment. Print the previous picture and this one and give it to him. Have him connect the computer, go to "Work Support" mode and find the Unlock functions just like in the previous picture. It's MODE 2, I don't know if I can help him any more than that.

Please let me know how it turns out, this shouldn't be that difficult for them.
 

Attachments

All four unlock in park on mine. All I did was show the tech the picture that Grey1 posted and that was it.
 
  • Like
Reactions: Grey1
21 - 40 of 85 Posts